Contents:
| Lift Points And Precautions For Lift |
Acquaint the following instructions below when using lift.
|
•
|
Keep the vehicle empty weight when lifting with lift. If it is inevitable, be careful not to
exceeds the
maximum weight of the lift.
|
|
•
|
Use the counter weight or install the safety jack to prevent the vehicle from falling when
removing heavy
parts such as engine or transaxle.
|
|
•
|
Install the rubber block to prevent the lift points from damage.
|
|
•
|
Before operating the lift, make sure there is no tool, parts, equipment, or people under the
vehicle.
|
|
•
|
Follow the safety instructions in the manual provided by the lift manufacturer.
|
|
•
|
Install jacks using only provided lift points in this manual.
[Front]
[Rear]
|
[Precautions for 2 Post Lift]
| 1.
|
Place the vehicle on the lift to balance the front, rear, left and right sides of the vehicle
slowly so
that the vehicle centered on the lift.
|
| 2.
|
For safety, lift the vehicle that it slightly falls off the ground, and then shake the vehicle
to check
the support condition.
|
| 3.
|
If safety has been verified, lift the vehicle.
|
[Precautions for 4 Post Lift]
| 1.
|
Place the vehicle on the lift to balance the front, rear, left and right sides of the vehicle
slowly so
that the vehicle centered on the lift.
|
| 2.
|
Use wheel chocks to prevent vehicle from moving accidentally.
|
[Precautions for Scissor Lift]
| 1.
|
Be careful not to let the lift interfere with underbody parts when lifting the vehicle.
|
[Precautions for Floor Jack]
| 1.
|
Use wheel chocks to prevent vehicle moved accidentally.
|
| 2.
|
Do not install the floor jack except for the front subframe, rear crossmember, and lift points.
|