Kia K4: Heating,Ventilation And Air Conditioning / Controller

Contents:

Heater and Air Conditioning Controller On Vehicle Inspection

On Vehicle Inspection
Diagnosis with KDS
1. The controller can be more quickly diagnosed for problems with the KDS (Refer to "DTC guide").
(1) Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS. (Refer to DTC guide when fault code is found)

Heater and Air Conditioning Controller Removal and Installation

Removal
1. Remove the crash pad air vent. [Passenger's side] (Refer to Body - “Crash Pad Air Vent�)
2. Remove the heater and air conditioning controller (A) after removing the screws.

Heating,Ventilation And Air Conditioning — Controller / Heater and Air Conditioning Controller / Removal and Installation / Removal illustration

3. Disconnect the controller connector (A).

Heating,Ventilation And Air Conditioning — Controller / Heater and Air Conditioning Controller / Removal and Installation / Removal illustration

Installation
1. Install in the reverse order of removal.

Auto Temperature Control Unit On Vehicle Inspection

On Vehicle Inspection
Diagnosis with KDS
1. The auto temperature control unit can be more quickly diagnosed for problems with the KDS (Refer to "DTC guide").
(1) Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS. (Refer to DTC guide when fault code is found)
Information    
Refer to the KDS screen for operating conditions and details.

Auto Temperature Control Unit Removal and Installation

Removal
1. Remove the crash pad center panel. (Refer to Body - "Crash Pad Panel")
2. Disconnect the auto temperature control unit connectors (A).

Heating,Ventilation And Air Conditioning — Controller / Auto Temperature Control Unit / Removal and Installation / Removal illustration

3. Remove the unit (A) after removing the bolts.
Tightening torque: 7.8 - 11.8 N·m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb·ft)

Heating,Ventilation And Air Conditioning — Controller / Auto Temperature Control Unit / Removal and Installation / Removal illustration

Installation
1. Install in the reverse order of removal.

Other information:

Kia K4 (CL4) 2025-2026 Service Manual: Limitations of Forward Collision-Avoidance Assist

While the Forward Collision-Avoidance Assist (FCA) system is designed to enhance safety in your Kia K4, its operational effectiveness can be impacted by complex traffic dynamics and environmental surroundings. Understanding these boundaries is essential for the responsible operation of your Kia K4. The operational range and responsiveness of the system may decrease depending on the behavior of vehicles ahead and the surrounding driving environment.

Kia K4 (CL4) 2025-2026 Service Manual: High Beam Assist (HBA)

The High Beam Assist (HBA) feature in your Kia K4 provides automated convenience by switching between high and low beams based on the detection of oncoming vehicles, preceding taillights, and ambient road brightness. This helps maximize your vision without blinding other road users. Detection sensor The system relies on a high-resolution forward-facing camera.

Contents

Categories

Copyright © 2026 Kia K4 Manuals � 0.0147