Kia K4: Body (Interior / Exterior / Electrical) / Fender

Contents:

Fender Assembly Removal and Installation

Removal
1. Remove the side sill molding. (Refer to Body Side Molding - "Side Sill Molding")
2. Remove the head lamp. (Refer to Light & Vision System - "Head Lamp")
3. Remove the front bumper mounting bracket. (Refer to Front & Rear Bumper - "Bumper Mounting Bracket")
4. Remove the side repeater lamp. [Fender side] (Refer to Light & Vision System - "Turn Signal Lamp")
5. Remove the fender (A) after removing the bolts and nut.
Tightening torque Bolt : 7.7 - 11.6 N·m (0.79 - 1.18 kgf·m, 5.7 - 8.5 lb·ft) Nut : 7.5 - 11.1 N·m (0.76 - 1.13 kgf·m, 5.5 - 8.2 lb·ft)

Body (Interior / Exterior / Electrical) — Fender / Fender Assembly / Removal and Installation / Removal illustration

Installation
1. Install in the reverse order of removal.

Other information:

Kia K4 (CL4) 2025-2026 Service Manual: Rear Cross-Traffic Collision-Avoidance Assist operation

To ensure maximum safety, the Rear Cross-Traffic Collision-Avoidance Assist system in the Kia K4 utilizes tiered intervention strategies based on the assessed risk level: Collision Warning: Active notifications to alert the driver. Emergency Braking: Automatic application of brakes to mitigate impact. Vehicle Stabilization: Stopping the vehicle and modulating brake control to ensure safety.

Kia K4 (CL4) 2025-2026 Service Manual: Vehicle weight

This section provides essential guidance on the proper loading procedures for your Kia K4 to ensure the total weight remains within its engineered design ratings. Understanding and respecting these limits is fundamental to maximizing the performance, handling, and safety of your Kia K4. Before you begin loading your vehicle, please familiarize yourself with the following terminology, which is used to define weight ratings in your Kia K4 specifications and on the official vehicle certification label.

Contents

Categories

Copyright © 2026 Kia K4 Manuals � 0.008