Contents:
Components and Components Location

1. Airbag Control Unit (ACU) 2. Front
Impact Sensor
(FIS) 3. Pressure Type Side Impact Sensor (P-SIS)
|
4. Acceleration Type Side Impact Sensor
(A-SIS) 5.
Occupant Detecting System (ODS)
|
Description and Operation
| 1.
|
Airbag Control Unit (ACU)
|
•
|
The airbag control unit determines whether and when to deploy the airbag and
the seat belt
pretensioner.
|
|
•
|
It supplies the power required for deployment at the time of deployment of the
airbag or seat
belt pretensioner.
|
|
•
|
The airbag control unit main functions.
|
|
–
|
Rollover accident detection.
|
|
–
|
Airbag system self diagnosis.
|
|
–
|
When a fault in the airbag system, displayed a warning light.
|
|
–
|
When an accident the vehicle, supply of door unlock signal.
|
|
| 2.
|
Front Impact Sensor (FIS) : When the event of a head-on collision, the airbag control unit uses
the front
impact sensor signal to determine whether and when to deploy the driver airbag, passenger
airbag, knee
airbag, and seat belt pretensioner.
|
| 3.
|
Side Impact Sensor (SIS)
|
•
|
The side impact sensor consists of the pressure type side impact sensor sensing
the collision
pressure, and the acceleration type side impact sensor sensing the collision
acceleration.
|
|
•
|
When the event of a side collision, the SRS control module uses the side impact
sensor signal to
determine whether and when to deploy the side airbag, curtain airbag.
|
|
| 4.
|
Occupant Detective System (ODS)
|
•
|
The occupant detecting system classifies passenger seats (vacant seats, child
seats and children
/ adults) and sends passenger information to the airbag control unit.
|
|
•
|
The airbag control unit uses passenger information and collision signals to
determine whether to
deploy the passenger airbag.
|
|
Airbag Control Unit (ACU) On Vehicle Inspection
| 1.
|
The airbag control unit can be more quickly diagnosed for problems with the KDS (Refer to "DTC
guide").
| (1)
|
Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS.
(Refer to DTC guide when fault code is found)
|
| (2)
|
S/W Management : Controlling other features including system option setting and
zero point
adjustment.
(S/W Management → Airbag → ACU Variant Coding)
|
|
Refer to the KDS screen for operating conditions and details.
|
|
Airbag Control Unit (ACU) Removal and Installation
| 1.
|
Disconnect the battery negative (-) terminal.
|
After disconnecting the battery negative ( - ) terminal, wait at least 3
minutes and 30 seconds.
|
|
| 2.
|
Remove the floor console assembly.
(Refer to Body - "Floor Console Assembly")
|
| 3.
|
Disconnect the Airbag Control Unit (ACU) connectors (A).
|
| 4.
|
Remove the ACU (A) after removing the nuts.
|
Tightening torque :
7.8 - 9.5 N·m (0.80 - 0.97 kgf·m, 5.8 - 7.0 lb·ft)
|
|
| 1.
|
Install in the reverse order of removal.
|
For Airbag Control Unit (ACU) with a rollover detection feature, the airbag may
deploy due to
movements occurring during installation. Therefore, do not install the airbag
control unit with the
battery connected or within 3 minutes and 30 seconds of disconnecting the
battery negative ( - )
terminal.
|
|
Be sure to keep the torque specifications presented in shop manuals. Otherwise,
it could lead to
the malfunction of airbag system.
|
|
| 2.
|
Check that the airbag system operates normally.
|
When the IG is on, the airbag warning lamp should turns off after turning on
for 3 - 6 seconds.
|
|
| 3.
|
Perform the order below with the KDS when replacing the airbag control unit.
(S/W Management → Airbag → ACU Variant Coding)
|
Refer to the KDS screen for operating conditions and details.
|
|
| 4.
|
Perform Over The Air (OTA) controller S/W update with KDS.
(Refer to Security & Vehicle Ignition System - "Over The
Air
(OTA)")
|
Front Impact Sensor (FIS) On Vehicle Inspection
| 1.
|
The front impact sensor can be more quickly diagnosed for problems with the KDS (Refer to "DTC
guide").
| (1)
|
Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS.
(Refer to DTC guide when fault code is found)
|
|
Refer to the KDS screen for operating conditions and details.
|
|
Front Impact Sensor (FIS) Removal and Installation
Front Impact Sensor (FIS)
| 1.
|
Remove the front bumper assembly.
(Refer to Body - "Front Bumper Assembly")
|
| 2.
|
Disconnect the sensor connectors (A).
Driver's Side
Passenger's Side
|
| 3.
|
Remove the FIS (A) after removing the nut.
|
Tightening torque :
7.5 - 9.1 N·m (0.76 - 0.93 kgf·m, 5.5 - 6.7 lb·ft)
|
Driver's Side
Passenger's Side
|
| 1.
|
Install in the reverse order of removal.
|
Be sure to keep the torque specifications presented in shop manuals. Otherwise,
it could lead to
the malfunction of airbag system.
|
|
| 2.
|
Check that the airbag system operates normally.
|
When the IG is on, the airbag warning lamp should turns off after turning on
for 3 - 6 seconds.
|
|
Passenger Occupant Detecting System (PODS) On Vehicle Inspection
| 1.
|
The passenger occupant detecting system can be more quickly diagnosed for problems with the KDS
(Refer to
"DTC guide").
| (1)
|
Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS.
(Refer to DTC guide when fault code is found.)
|
| (2)
|
S/W Management : Controlling other features including system option setting and
zero point
adjustment.
(S/W Management → Occupant Classification System → Zero Re-calibration of
Occupant Classification
Sensor)
|
|
Refer to the KDS screen for operating conditions and details
|
|
Passenger Occupant Detecting System (PODS) Removal and Installation
Occupant Detection System (ODS)
| 1.
|
Replace the front seat cushion cover assembly. [Passenger's
side]
(Refer to Body - "Front Seat Cushion Cover Assembly")
|
|
•
|
The ODS cannot be replaced individually due to included in the seat cushion
assembly.
|
|
•
|
If necessary, replace the seat cushion assembly.
|
|
| 1.
|
Install in the reverse order of removal.
|
| 2.
|
Perform in the order below with the KDS.
(S/W Management → Occupant Classification System → Zero Re-calibration of Occupant
Classification Sensor)
|
After initializing the PODS unit, erase DTC regarding the airbag control unit
and the PODS unit.
|
|
Refer to the KDS screen for operating conditions and details.
|
|
| 3.
|
Perform Over The Air (OTA) controller S/W update with KDS.
(Refer to Security & Vehicle Ignition System - "Over The
Air
(OTA)")
|
Side Impact Sensor (SIS) On Vehicle Inspection
| 1.
|
The side impact sensor can be more quickly diagnosed for problems with the KDS (Refer to "DTC
guide").
| (1)
|
Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS.
(Refer to DTC guide when fault code is found)
|
|
Refer to the KDS screen for operating conditions and details.
|
|
Side Impact Sensor (SIS) Removal and Installation
Pressure Type Side Impact Sensor (P-SIS)
| 1.
|
Disconnect the battery negative (-) terminal.
|
After disconnecting the battery negative ( - ) terminal, wait at least 3
minutes and 30 seconds.
|
|
| 2.
|
Remove the front door trim seal.
(Refer to Body - "Front Door Trim")
|
| 3.
|
Disconnect the sensor connector (A).
|
| 4.
|
Remove the P-SIS (A) after removing the screws.
|
Tightening torque :
2.5 - 3.5 N·m (0.26 - 0.36 kgf·m, 1.9 - 2.6 lb·ft, 22.6 - 31.2 lb·in)
|
|
Acceleration Type Side Impact Sensor (A-SIS)
| 1.
|
Disconnect the battery negative (-) terminal.
|
After disconnecting the battery negative ( - ) terminal, wait at least 3
minutes and 30 seconds.
|
|
| 2.
|
Remove the lower center pillar trim.
(Refer to Body - "Center Pillar Trim")
|
| 3.
|
Disconnect the A-SIS connector (A).
|
| 4.
|
Remove the A-SIS (A) after removing the bolt.
|
Tightening torque :
10.3 - 12.6 N·m (1.05 - 1.28 kgf·m, 7.6 - 9.3 lb·ft)
|
|
| 1.
|
Install in the reverse order of removal.
|
Be sure to keep the torque specifications presented in shop manuals. Otherwise,
it could lead to
the malfunction of airbag system.
|
|
| 2.
|
After installing the sensor, make sure that the system operates normally.
|
When the IG is on, the airbag warning lamp should turns off after turning on
for 3 - 6 seconds.3
|
|
Other information:
Kia K4 (CL4) 2025-2026 Service Manual: Light switch settings
Setting
Result
Figure 1. Position lamp and taillight
Front position lamp, taillights, and license plate lamp are ON.
TIP
The Kia K4 must be in the ON position to turn on these headlights.
Kia K4 (CL4) 2025-2026 Service Manual: With the mechanical key
When electronic proximity power is lost due to a dead transmitter battery or vehicle voltage depletion, the secondary backup physical security option allows full manual access. Please note that only the driver’s individual door can be locked or unlocked mechanically using the manual metal key blade assembly hidden inside your proximity transmitter.