Contents:
| Special Service Tool |
| Tool Name / Number |
Illustration |
Description |
| Engine support fixture (bar) 09200 - 3N000 |
|
Used for holding engine assembly when removing / installing automatic
transaxle ※ Refer to the engine support fixture assembly below |
| Engine support fixture (front supporter) 09200 - C3610 |
|
Used for holding engine assembly when removing / installing automatic
transaxle ※ Refer to the engine support fixture assembly below |
|
Engine support fixture (rear supporter) 09200 - L1100 |
|
Used for holding engine assembly when removing / installing automatic transaxle ※ Refer to the engine support fixture assembly below |
|
Engine fixture (adapter) 09200 - 4X000 |
|
Used for holding engine assembly when removing / installing automatic transaxle ※ Refer to the engine support fixture assembly below |
| Oil seal installer 09452 - 26100 |
|
Used for transaxle case and housing oil seal installation Used with the handle |
|
Handle 09231 - H1100 |
|
Used for transaxle case and housing oil seal installation Used with the installer |
| Position switch guide pin 09480 - A3800 |
|
Used for fixing N range when installing position switch |

| Video Guide |
|
Video: Automatic Transaxle System Components
| 1. Automatic Transaxle Support Bracket |
6. Position Switch |
| 2. Torque Converter |
7. Valve Body Cover |
| 3. Oil Seal |
8. Valve Body Assembly |
| 4. Roll Rod Support Bracket |
9. Speed Sensor |
| 5. Manual Control Lever |
10. E-Module |
| Troubleshooting |
|
| Shifting delayed/shift shock while driving |
|
Symptom |
Suspected Cause |
Correction |
|
1 → 2 or 2 → 1 |
28, OD&LR solenoid valve fault (If shifting 4th to 5th operates as normal, replace 28 solenoid valve) 2. 37R, 28 brake fault |
1. Replace the faulty solenoid valve 2. Check for the clutch/brake abnormality - Disc damage - Piston D-ring damage - Clutch sealing damage ※ Replace the transaxle assembly when the clutch/brake is damaged ※ It is necessary to reproduce the symptoms and check the shifting position in manual mode when shift shock occurs. |
|
2 → 3 or 3 → 2 |
37R, 28 solenoid valve fault (If shifting from 1st to 2nd is normal, replace 37R solenoid valve) 2. 37R, 28 clutch fault |
|
|
3 → 4 or 4 → 3 |
46, 37R solenoid valve fault (If shifting from 2nd to 3rd is normal, replace 46 solenoid valve) 2. 46, 37R clutch fault |
|
|
4 → 5 or 5 → 4 |
OD&LR, 46 solenoid valve fault (If shifting from 3rd to 4th is normal, replace OD solenoid valve) 2. OD, 46 clutch fault |
|
|
5 → 6 or 6 → 5 |
OD&LR, 46 solenoid valve fault (If shifting from 4th to 5th is normal, replace 46 solenoid valve) 2. OD, 46 clutch fault |
|
|
6 → 7 or 7 → 6 |
37R, 46 solenoid valve fault (If shifting from 4th to 5th is normal, replace 37R solenoid valve) 2. 37R, 46 clutch fault |
|
|
7 → 8 or 8 → 7 |
28, 37R solenoid valve fault (If the shift from 3rd to 4th is normal, replace 28 solenoid valve) 2. 28, 37R clutch fault |
| Shifting shock while the vehicle is stationary. |
|
Symptom |
Suspected Cause |
Correction |
| N ↔ D or N ↔ R |
1. D position : UD solenoid valve fault 2. R position : 37R solenoid valve fault 3. UD/37R clutch fault |
1. Replace the UD solenoid valve 2. Replace 37R solenoid valve 3. Inspect UD/37R clutch |
| Delay/jerks when the damper is engaged |
|
Suspected causes |
Correction |
| 1. ECM / TCM mapping 2. The damper clutch solenoid valve fault 3. Torque converter oil flow path pressure leakage 4. Oil level low |
Check the current state using the DLogger 1. The ECM / TCM update 2. Replace the valve body assembly 3. Replacing torque converter and checking the oil level |
| P → D thumping noise (slope) |
|
Suspected causes |
Correction |
|
Sound occurs when the parking sprague is released |
Normal |
| Vibrating while stopped (in the N position) |
|
Suspected causes |
Correction |
|
UD solenoid valve fault |
Replace the UD solenoid valve |
| Mechanical limp home mode (locked into 5th) |
|
Suspected causes |
Correction |
|
Solenoid valve fault |
Replace the faulty solenoid valve |
| Main connector connection fault |
Inspect the connector connection |
|
Replace the E Module |
|
|
TCM fault |
Replace the TCM |
| Position switch fault |
Inspect the connector connection |
|
Replace the position switch |
| Limp home mode (locked into 5th, 2nd - 5th manual shift enabled) |
|
Suspected causes |
Correction |
|
Input speed sensor fault |
Replace the sensor |
|
Output speed sensor fault |
Replace the sensor |
| Connector connection fault |
Inspect the connector connection |
|
Replace the E Module |
| Manual shift disabled |
|
Suspected causes |
Correction |
|
TCM fault |
Replace the TCM |
|
Connector connection fault |
Inspect the connector connection |