Contents:
Components and Components Location
Interior Trim [4DR]
1. Front Pillar Trim 2. Front Door Scuff
Trim 3.
Cowl Side Trim 4. Rear Door Scuff Trim
|
5. Center Pillar Lower Trim 6. Center
Pillar Upper
Trim 7. Rear Pillar Trim
|
Interior Trim [5DR]
1. Front Pillar Trim 2. Front Door Scuff
Trim 3.
Rear Door Scuff Trim 4. Cowl Side Trim
|
5. Center Pillar Lower Trim 6. Center
Pillar Upper
Trim 7. Rear Pillar Trim
|
Center Pillar Trim Removal and Installation
|
The indication below represents the location of a clip or fastener.
|
Lower Center Pillar Trim
| 1.
|
Remove the front and rear door scuff trim.
(Refer to Interior Trim - "Door Scuff Trim")
|
| 2.
|
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
|
| 3.
|
Remove the trim (A).
|
Upper Center Pillar Trim
| 1.
|
Remove the lower center pillar trim.
|
| 2.
|
Open the seat belt anchor cover (A).
|
| 3.
|
Separate the seat belt (A) after removing the bolt.
|
Tightening torque :
39.2 - 53.9 N·m (4.0 - 5.5 kgf·m, 28.9 - 39.8 lb·ft)
|
|
| 4.
|
Remove the trim (A).
|
| 1.
|
Install in the reverse order of removal.
|
Cowl Side Trim Removal and Installation
| 1.
|
Remove the front door scuff trim.
(Refer to Interior Trim - "Door Scuff Trim")
|
| 2.
|
Remove the cowl side trim (A).
|
| 1.
|
Install in the reverse order of removal.
|
Door Scuff Trim Removal and Installation
Front Door Scuff Trim
| 1.
|
Remove the front door body side weather strip.
(Refer to Front Door - "Front Door Weather Strip")
|
| 2.
|
Remove the trim (A).
|
Rear Door Scuff Trim
| 1.
|
Remove the rear door body side weather strip.
(Refer to Rear Door - "Rear Door Weather Strip")
|
| 2.
|
Remove the rear seat cushion assembly.
(Refer to Rear seat -"Rear Seat Assembly")
|
| 3.
|
Remove the rear seat side back assembly.
(Refer to Rear seat -"Rear Seat Assembly")
|
| 4.
|
Remove the trim (A) after removing the screws.
|
| 1.
|
Install in the reverse order of removal.
|
Floor Carpet Assembly Removal and Installation
|
The indication below represents the location of a clip or fastener.
|
| 1.
|
Remove the front seat assembly. [Both side]
(Refer to Front Seat - "Front Seat Assembly")
|
| 2.
|
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
| 3.
|
Remove the lower center pillar trim. [Both side]
(Refer to Interior Trim - "Center Pillar Trim")
|
| 4.
|
Remove the cowl side trim. [Both side]
(Refer to Interior Trim - "Cowl Side Trim")
|
| 5.
|
Remove the floor console assembly.
(Refer to Floor Console - "Floor Console Assembly")
|
| 6.
|
Remove the air vent ducts (A).
|
| 7.
|
Remove the fasteners (A).
|
| 8.
|
Remove the floor carpet assembly (A) after removing the fastener.
|
| 1.
|
Install in the reverse order of removal.
|
Front Pillar Trim Removal and Installation
|
The indication below represents the location of a clip or fastener.
|
| 1.
|
Remove the front door body side weather strip.
(Refer to Front Door - "Front Door Weather Strip")
|
| 2.
|
Remove the clip (A).
|
•
|
Separate the clip by releasing the hooks (A).
|
|
•
|
The clip should be replaced with new ones. (Do not reuse)
|
|
Front Pillar Trim Mounting Clip Separation (Play â–¶)
Video: Front Pillar Trim
Mounting Clip
Separation
Notes When Refering Video
This video helps clearly identify areas that are hard to distinguish in manual images, such as
component
locations or assembly structures.
It also allows visual confirmation of areas that are difficult to see directly due to
restricted
visibility caused by surrounding components, from a technician’s perspective.
|
•
|
This video is created using common specifications and may differ from the
actual vehicle.
|
|
•
|
The location and repair procedures of the parts may vary depending on vehicle
model, model year,
region, and specifications.
|
|
•
|
Check the KDS guide for detailed information on how to use the KDS.
|
|
•
|
Check the manual for detailed maintenance procedures.
|
|
•
|
Unauthorized reproduction, distribution, or sharing of this video is
prohibited.
|
|
| 3.
|
Remove the front pillar trim (A).
|
| 4.
|
Disconnect the tweeter speaker connector (A).
|
| 1.
|
Install in the reverse order of removal.
|
Rear Pillar Trim Removal and Installation - 4DR
|
The indication below represents the location of a clip or fastener.
|
| 1.
|
Remove the rear door body side weather strip.
(Refer to Rear Door - "Rear Door Weather Strip")
|
| 2.
|
Remove the rear seat side back assembly.
(Refer to Rear Seat - "Rear Seat Assembly")
|
| 3.
|
Remove the rear pillar trim (A).
|
| 1.
|
Install in the reverse order of removal.
|
Rear Pillar Trim Removal and Installation - 5DR
|
The indication below represents the location of a clip or fastener.
|
| 1.
|
Remove the rear door body side weather strip.
(Refer to Rear Door - "Rear Door Weather Strip")
|
| 2.
|
Remove the C shelf side trim.
(Refer to Luggage Trim - "C Shelf Side Trim")
|
| 3.
|
Remove the rear pillar trim (A) after removing the bolts.
|
Tightening torque:
6.9 - 10.8 N·m (0.7 - 1.1 kgf·m, 5.1 - 8.0 lb·ft)
|
|
| 1.
|
Install in the reverse order of removal.
|
Other information:
Kia K4 (CL4) 2025-2026 Service Manual: Shift lock system
For your protection, the Kia K4 is equipped with a shift lock system. This safety mechanism is designed to prevent the transmission from being shifted out of P (Park) and into R (Reverse) or D (Drive) unless the brake pedal is firmly engaged.
To safely shift your Kia K4 from P (Park):
Engage and hold the brake pedal firmly.
Ensure the ignition is in the ON position.
Kia K4 (CL4) 2025-2026 Service Manual: Battery On Vehicle Inspection
On Vehicle Inspection
Battery Visual and Basic Inspection
1.
Check the battery terminal corrosion and connection.
2.
Check the battery leakage or swelling.
3.